Viper 5706V オーナーマニュアル
© 2013 Directed. All rights Reserved.
2
QRN5X06 2013-08
Programming System Features
The System Features Learn Routine dictates how the unit operates. It is possible to
access and change most of the feature settings using the Control button.
access and change most of the feature settings using the Control button.
1. Open a door.
2. Turn the ignition on, then off.
3. Select a Menu. Press and hold the Control button. The number of siren chirps
2. Turn the ignition on, then off.
3. Select a Menu. Press and hold the Control button. The number of siren chirps
indicates the menu number. 1 chirp indicates menu 1, 2 chirps - menu 2 and
3 chirps for menu 3.
3 chirps for menu 3.
4. When the desired menu chirps are heard, release the Control button.
5. Select a Feature. Press and release the Control button the number of times
5. Select a Feature. Press and release the Control button the number of times
corresponding to the feature you wish to change. Then press and hold one
more time to select the features.
more time to select the features.
6. Program the Feature. While holding the Control button, you can program the
feature using the remote control.
For features with only two options;
= option 1 while
= option 2.
For features with more than two options;
selects the options in ascending order,
while
selects them in descending order.
Note:
Pressing
button resets the feature to the factory default.
Once a feature is programmed:
•
•
Other features can be programmed within the same menu
•
Another menu can be selected
•
The learn routine can be exited if programming is complete
To access another feature in the same menu:
1. Press and release the Control button the number of times necessary to advance
1. Press and release the Control button the number of times necessary to advance
from the feature you just programmed to the next one you want to program.
2. Then
press the Control button once more and hold it.
To select another menu:
1. Press and hold the Control button.
2. After 3 seconds, the unit advances to the next menu and the siren chirps, indi-
1. Press and hold the Control button.
2. After 3 seconds, the unit advances to the next menu and the siren chirps, indi-
cating which menu has been accessed.
The learn routine exits if any of the following occurs:
•
•
The open door is closed
•
The ignition is turned On
•
There is no activity for 30 seconds
•
The Control button is pressed too many times
Feature Menus
Default settings are in bold type.
Menu 1 - Security
Menu
Item
Feature
Opt. 1
Opt. 2
Opt. 3
Opt.4
Opt. 5+
1
System Arming Mode
Active
Passive Arm
w/o lock
w/o lock
Passive
Arm w/
lock
Arm w/
lock
Auto re-arm
w/o lock
w/o lock
Auto
re-arm w/
lock
re-arm w/
lock
2
Panic Mode
On
Ign Off
only
only
Off
3
Confirmation Chirps
On w/Warn
chirps On
chirps On
On w/
Warn
chirps Off
Warn
chirps Off
Off w/
Warn
chirps On
Warn
chirps On
Off w/
warn
chirps Off
warn
chirps Off
4
Siren Duration
30 sec.
60 sec.
5
Ign-controlled Locks
No Ign-
locking
locking
Lock &
Unlock
Unlock
Lock Only
Unlock
Only
Only
6
Door Lock Pulses
Single
Double
Unlock
Only
Unlock
Only
Double
Lock Only
Lock Only
Double
Lock &
Unlock
Lock &
Unlock
7
Door Lock Output
Duration
Duration
0.8 sec.
3.5 sec.
0.4 sec.
8
2nd Unlock
2nd unlock
on Ign-
control after
first unlock
on Ign-
control after
first unlock
2nd unlock
on Ign-
control with
first unlock
on Ign-
control with
first unlock
9
Comfort Closure
No Comfort
Closure
Closure
Comfort
Closure 1
Closure 1
Comfort
Closure 2
Closure 2
10
Horn Function
Full Alarm
Only
Only
Siren Func-
tion 20 ms
tion 20 ms
Siren Func-
tion 30 ms
tion 30 ms
Siren
Function
40 ms
Function
40 ms
Siren Func-
tion 50 ms
tion 50 ms
11
Hood Switch type
Normally
Open
Normally
closed
closed
12
Sensor Full trigger
Single
Double
13
Door Switch Type
Normally
open
open
Normally
closed
closed
14
Trunk Switch Type
Normally
open
open
Normally
closed
closed
15
Remote Button unlock
(Ign off)*
(Ign off)*
On
Off
* Not available with the 1-way remote control.
Menu 2 - Convenience
Menu
Item
Feature
Opt. 1
Opt. 2
Opt. 3
Opt.4
Opt. 5+
1
One-time Bypass
One time
bypass
Off
bypass
Off
One time
bypass On
bypass On
2
Nuisance Prevention
On
Off
3
Override Pulse count
1
2
3
4
5
4
Door Trigger Error
Chirp
Chirp
On
Off
5
Ign-controlled Dome
light
light
On
Off
6
OEM Alarm Disarm
w/Aux-Trunk
w/Aux-Trunk
On
Off
7
OEM Alarm Disarm
Output
Output
With
Unlock
Unlock
Before
Unlock
Unlock
Remote
Start Only
Start Only
8
OEM Alarm Disarm
Pulses
Pulses
1
2
9
Aux 1 Output type
Validity
Latch
Latch/
reset/ign
reset/ign
30 sec.
Timed
Timed
Off (5)/2nd
unlock (6)
unlock (6)
10
Aux 1 Linking
No Linking
Link to Arm
Link to
Disarm
Disarm
Link to
Arm/
disarm
Arm/
disarm
Link to
Remote Start
only
Remote Start
only
11
Aux 2 Output Type
Validity
Latch
Latch
reset/ign
reset/ign
30 sec.
Timed
Timed
Off (5)/2nd
unlock (6)
unlock (6)
12
Aux 2 Linking
No Linking
Link to Arm
Link to
Disarm
Disarm
Link to
Arm/
Disarm
Arm/
Disarm
Link to
Remote Start
only
Remote Start
only
13
Aux 3 Output Type
Validity
Latch
Latch
reset/ign
reset/ign
30 sec.
Timed
Timed
Off (5)/2nd
unlock (6)
unlock (6)
14
Aux 3 Linking
No Linking
Link to Arm
Link to
Disarm
Disarm
Link to
Arm/
Disarm
Arm/
Disarm
Smart Key
Control (Link
to Remote
Start Off)
Control (Link
to Remote
Start Off)
15
Aux 4 Output Type
Validity
Latch
Latch
reset/ign
reset/ign
30 sec.
Timed
Timed
Off (5)/2nd
Unlock (6)
Unlock (6)
16
Aux 4 Linking
No linking
Link to Arm
Link to
Disarm
Disarm
Link to
Arm/
Disarm
Arm/
Disarm
Link to
Remote Start
Only
Remote Start
Only
17
Aux/Trunk Output type
Validity
Off
2nd unlock
Menu 3 - Remote start
Menu
Item
Feature
Opt. 1
Opt. 2
Opt. 3
Opt.4
Opt. 5+
1
Transmission Mode
Manual
Automatic
2
Engine Checking Mode
Virtual
Tach
Tach
Voltage
Off
Tachom-
eter
eter
3
Cranking Time
0.6 sec.
0.8 sec.
1.0 sec.
1.2 sec.
1.4 (5)/ 1.6
(6)/ 1.8 (7)
2.0 (8)/
4.0 (9)
(6)/ 1.8 (7)
2.0 (8)/
4.0 (9)
4
Remote Start Runtime
12 min.
24 min.
60 min.
5
Activation Pulse Count
1
2
6
Turbo Mode
No Turbo
Mode
Mode
On-1 min.
On-3 min.
On-5 min.
On- 10 min.
7
Timer Mode Runtime
12 min.
3 min.
6 min.
9 min.
8
Flex Relay Function
Ignition 2
Acces-
sory 2
sory 2
Starter 2
9
Diesel Start Delay
Wait-to
Start input
Start input
Timed 15
sec.
sec.
Timed 30
sec.
sec.
Timed 45
sec.
sec.
10
Accessory during Diesel
Start Delay
Start Delay
On
Off
11
Status 2 Output
Status
Latch Rear
Defogger
Defogger
Pulse Rear
Defogger
Defogger
12
Parking Light Output
Constant
Pulsed Off
13
Anti-grind Output
On
Off
14
Tach Mode Starter
Release
Release
Normal
Increase
Decrease
15
Vehicle Temp
Auto Report*
Auto Report*
Off
On
16
Remote Start Safelock
Off
On
* Not available with the 1-way remote control.
Reset and Delete
To reset the features/virtual tach or delete remote controls follow this procedure:
1. Open at least one vehicle door
2. Turn the key to the ON position
3. Within 5 seconds press and release the control button: 2 times to delete re-
1. Open at least one vehicle door
2. Turn the key to the ON position
3. Within 5 seconds press and release the control button: 2 times to delete re-
motes, 3 times to reset the features to default or 4 times to reset virtual tach.
4. Once you have selected the function step, press the control button once more
and hold it. The LED will flash and the siren will chirp to confirm the functional
step chosen. Release the control button.
step chosen. Release the control button.
5. Press
the button of a programmed remote control. The siren will chirp con-
firming the feature has been reset/deleted.
Note
: Deleting a remote control does not reset the features or virtual tach, resetting
the features does not delete remote controls or reset virtual tach. The Zap feature on
the Bitwriter will not reset the virtual tach setting.
the Bitwriter will not reset the virtual tach setting.
Reset/delete will exit if:
•
•
The ignition is turned off
•
The open door is closed
•
60 seconds lapses with no actions.
Remote Pairing
Prepare the vehicle system to be Paired with a new remote
1. Open at least one vehicle door.
2. Turn the key to the ON position.
3. Within
1. Open at least one vehicle door.
2. Turn the key to the ON position.
3. Within
5
seconds
press and release the Control button on the Control Center
one time.
4. Within
5
seconds,
press and hold the Control button on the Control Center.
The status LED begins flashing in single flash sequence and the siren chirps
once to confirm the system is ready for remote pairing. Release the button.
once to confirm the system is ready for remote pairing. Release the button.
5. Locate your remote control model below and follow the instructions.
System Pairing will exit if:
•
•
The ignition is turned off
•
The open door is closed
•
60 seconds lapses with no actions
Note
: Make sure the remote to be paired with the system is set for the desired Car
1 or Car 2 operation.
HD Remote Control:
1. With the HD remote screen blank, press in and hold the menu wheel (located
1. With the HD remote screen blank, press in and hold the menu wheel (located
on the side) for 3 seconds until the
Settings
screen appears.
2. Toggle the menu wheel until the Adjustments screen appears.
3. Press in on the menu wheel to enter.
4. In
3. Press in on the menu wheel to enter.
4. In
the Adjustments menu highlight Remote Pair and press in the menu
wheel to go to the screen. Follow the on-screen instructions:
i.
i.
Press and hold the
button until tones are played.
ii.
The siren chirps to indicate the system has learned the remote ID and is
sending its ID to the remote
iii. Release
iii. Release
the button.
5. Successful or failed pair: The HD remote control indicates a successful or failed
pairing and returns to the Adjustments menu. If pairing fails, the remote will
go back to the Remote Pair screen, press the
go back to the Remote Pair screen, press the
button again to attempt
another pairing.
To exit pairing mode on the remote:
•
•
Press and release the
button.
•
Wait 30 seconds without pressing a command button on the remote.
LCD Remote Control:
1. Press
1. Press
and
hold
the button for 8 seconds, the remote beeps once,
Main Menu
is displayed. Release the
button.
2. Press
the
AUX or
buttons until Pair
is displayed.
3. Press and hold the
button until the remote beeps 3 times then release the
button. The remote is now ready to pair with the system.
4. Press
the button.
5. Wait several seconds for feedback as the remote generates a security encryp-
tion and sends it to the Control Center. If pairing is successful the siren chirps
and the remote emits several tones. The screen displays if the Pairing is success-
ful or failed with corresponding text. If pairing fails repeat step 4.
and the remote emits several tones. The screen displays if the Pairing is success-
ful or failed with corresponding text. If pairing fails repeat step 4.
To exit pairing mode on the remote:
•
•
Press and release the
button.
•
Wait 30 seconds without pressing a command button on the remote.
Responder LED or Companion Remote Control:
1. Press and hold the
1. Press and hold the
button for 8 seconds. The transmit LED will come on
solid. Release the
button.
2. Press
and
hold
the until the transmit LED flashes 3 times then comes on
solid.
3. Press
the button.
4. Wait several seconds for feedback as the remote generates a security encryp-
tion and sends it to the Control Center. If pairing is successful the siren will chirp
and the 2-way remote will emit several tones (the companion remote does not
generate tones). If pairing is not successful press and release the
and the 2-way remote will emit several tones (the companion remote does not
generate tones). If pairing is not successful press and release the
button
once and then repeat steps 2 and 3.
To exit pairing mode on the remote:
•
•
Press and release the
button once, then press and hold until the transmit
LED shuts off.
•
Wait 30 seconds without pressing a command button on the remote control.
Basic Remote Functions
Button
Level
DIRECT
ACCESS
ACCESS
X 1
X 2
X 3
X 4
ARM
SILENT ARM
SENSOR BYPASS
ARMED (SILENT
SENSOR)
ARMED (SILENT
TRIGGER)
DISARM
SILENT DISARM
VALET MODE
CAR FINDER
REMOTE START
RUNTIME RESET
TIMER MODE
SMART START
REAR DEFOGGER
A U
X
TRUNK RELEASE
AUX 1
AUX 2
AUX 3
AUX 4
FUNCTION SHIFT
CABIN TEMPERA-
TURE REQUEST
(2-WAY ONLY)
RUNTIME CHECK
(2-WAY ONLY)
LAST TRIGGER
REQUEST
(2-WAY ONLY)
Note: See Owner’s guide for your specific model for more details. The above table
is applicable to LCD, LED and Companion remote controls only, but not HD.
is applicable to LCD, LED and Companion remote controls only, but not HD.