Viking Huskylock 936 ユーザーズマニュアル

You can select the following languages :

American English, British English, French, Italian, German, Swedish, Norwegian, Danish, Finnish, 

Dutch, Spanish, Czech, Polish, and Russian.

1. Turn on the machine while pressing the auto button           and cursor button           simultane-

ously.  The pre-set language is displayed.

2. Press the plus button           or minus button           until the desired language is displayed.

3. Press the memory button         .

4. The selected language is now stored and stays in memory even if you turn off the machine.

The recommended settings are displayed for perfect stitching.

Note: Fabric and thread may vary. Therefore try the setting on scraps fi rst.

Turn on the machine, then “Auto A1” type of fabric “Woven med” (for woven medium)

and stitch “4-thread overlock” appears.

Change the stitch by pressing the stitch selection button         .  

Each time you press the button         , the recommended settings are displayed.

Compare with “2-7. Stitch table (page 15)” and continue pressing the stitch selection button           

until the desired stitch is displayed.

When the display shows “—” for the thread tension, it means “Do not thread here”.

Note: When it is necessary to change the accessory type, the accessory alert message is dis-

played. To cancel this message, press the auto button         . For accessory type, see “4. 

Sewing (page 25)”.

—11—