Viking Huskylock 936 ユーザーズマニュアル

—27—

Cording thread / decorative thread can be used 

to strengthen and stabilize stitches when seam-

ing stretch fabrics and for decorative effects. 

Listed below are two ways of using corded 

thread:

 •  Thread cord through the loop at the extreme 

left of the telescopic stand and through the 

guide on the left of the machine.

1. Place the narrow cord (about 3 mm) into the 

front hole of the presser foot and back under 

the foot, then sew so the right needle stitches 

through the cord.

2. Thread a narrow cord through the small hole 

on the right side of the presser foot near the 

needles according to the illustration. Make 

sure that the thread runs along the edge of 

the fabric, then sew over the thread.

2.

1.