Viking Huskylock 936 ユーザーズマニュアル

1. Raise the presser foot.

2. Open front cover.

3. Pull thread from spool through guide 

➀

 of the 

thread stand and then through guide 

➁

.

Note: Make sure the thread snaps into the slot 

of guide 

➁

, and then thread through 

➂

 

to 

➅

.

4. Turn the handwheel toward you and position 

the double chain stitch looper to the far right.

5. When you push the looper threading knob in 

the direction of the knob arrow as shown, the 

double chain stitch looper moves to the right, 

and you can pass thread into the thread hole 

at the end of the looper more easily.

6. Then thread through guides 

➆

 to 

➉

.

Note: Make sure the thread snaps into the slot 

of guide 

➇

.

7. Pull out the thread leaving about 10 cm.

8. When you start stitching after threading, the 

knob returns to the original position automati-

cally.

—37—

Thread guide E

Note: When using decorative thread by Five 

thread overlock stitch and Double chain 

stitch as illustrated.

           Insert Thread guide E from the back to-

ward the front as illustrated, then thread 

a decorative thread into Thread guide E.

When carrying the sewing machine, take off 

Thread guide E from the machine.

1

2

5

6

7

8

9

10

4

3

C

D

A

B

E

7

8

9

10