Viking Huskylock 936 ユーザーズマニュアル

5cm

1.5~2.0mm

750

—63—

D

C

B

E

A

(Included in optional Huskylock 936 Cover 

Stitch Kit, Part number: 412 6716-01)

1. Press the stitch selection button until “Auto L” 

“Chainstitch” appears. (Illus. A)

2. Press the fabric selection button until appro-

priate fabric type appears.

    Note: Although Sewing Advisor recommends 

needle A, use needle B. 

3. Raise presser foot and snap on Cording and 

Piping foot.

    Note: The cord guide is not used for this 

technique.

4. lnsert cording through the groove on cording 

and piping foot (Illus. B). Pull cord tail behind 

foot about 2” (5 cm).

    Note: 1/8”-1/4” (1~2.0 mm) cord can be used.

5. Wrap fabric around cording in front of foot 

(Illus. C). Slide fabric under front of foot (Illus. 

D)

6. Lower presser foot and sew over cord and 

fabric.

    Note: Hold cord behind foot when beginning 

to sew.

7. When shirring is desired, use elastic cord. 

Pull both ends of elastic cord after sewing to 

gather fabric (Illus. E)

    Note: Pulling on elastic while sewing may 

cause needle breakage.

Cording and 
Piping Foot