Viking Appliance Trim Kit F20196C EN ユーザーズマニュアル
Microwave Oven
Built-In Trim Kits
VMOS200
VMTK270/271
VMTK300/301
VMTK360/361
Overall Width
24” (60.9 cm)
26-1/2” (67.3 cm)
29-1/2” (74.9 cm)
35-1/4” (89.5 cm)
Overall Height from Bottom
13-3/8” (33.9 cm)
18-1/4” (46.3 cm)
18-1/4” (46.3 cm)
18-1/4” (46.3 cm)
Overall Depth from Rear
19-3/8” (49.2 cm)
N/A
N/A
N/A
Oven Interior
Width - 17-3/8” (44.1 cm)
N/A
N/A
N/A
Height - 10-1/2” (26.6 cm)
Depth - 18-5/8” (47.3 cm)
Overall - 2.0 cu. ft.
Cutout Width
N/A
Min. - 24-3/8” (61.9 cm)
Max. - 24-11/16” (62.7 cm)
Cutout Height
N/A
Min. - 16-3/4” (42.5 cm)
Max. - 17” (43.2 cm)
Cutout Depth
N/A
Min. 20” (50.8 cm)
Electrical Requirements
120VAC/60 Hz
N/A
N/A
N/A
Max. Amp Usage
1.65 KW; 13.5 amps
N/A
N/A
N/A
Approximate Shipping Wt.
55 lbs. (24.7 kg)
14 lbs. (6.5 kg)
15 lbs. (6.9 kg)
16 lbs. (6.9 kg)
BASIC SPECIFICATIONS
Microwave Oven
Built-In Trim Kits
DMOS200
DMTK270
DMTK300
Overall Width
24” (60.9 cm)
26-1/2” (67.3 cm)
29-1/2” (74.9 cm)
Overall Height from Bottom
13-3/8” (33.9 cm)
18-1/4” (46.3 cm)
18-1/4” (46.3 cm)
Overall Depth from Rear
19-3/8” (49.2 cm)
N/A
N/A
Oven Interior
Width - 17-3/8” (44.1 cm)
N/A
N/A
Height - 10-1/2” (26.6 cm)
Depth - 18-5/8” (47.3 cm)
Overall - 2.0 cu. ft.
Cutout Width
N/A
Min. - 24-3/8” (61.9 cm)
Max. - 24-11/16” (62.7 cm)
Cutout Height
N/A
Min. - 16-3/4” (42.5 cm)
Max. - 17” (43.2 cm)
Cutout Depth
N/A
Min. 20” (50.8 cm)
Electrical Requirements
120VAC/60 Hz
N/A
N/A
Max. Amp Usage
1.65 KW; 13.5 amps
N/A
N/A
Approximate Shipping Wt.
55 lbs. (24.7 kg)
14 lbs. (6.5 kg)
15 lbs. (6.9 kg)
3
IMPORTANT - PLEASE READ AND FOLLOW
•Before beginning, please read these instructions completely and carefully.
•Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the built-in trim kit. Remove
•Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the built-in trim kit. Remove
the turntable from the oven cavity.
•Because the kit includes metal parts, caution should be used in handling and installation to avoid the possibility of injury.
•Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty.
•Please observe all local and national codes and ordinances.
•The installer should leave these instructions with the consumer who should retain for local inspector’s use and for future
•Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty.
•Please observe all local and national codes and ordinances.
•The installer should leave these instructions with the consumer who should retain for local inspector’s use and for future
reference.
THIS BUILT-IN KIT IS DESIGNED FOR USE ONLY WITH VIKING MICROWAVE OVENS SPECIFYING BUILT-IN KIT
VMTK270/271, VMTK300/301, OR VMTK360 FOR PROFESSIONAL UNITS AND DMTK270 OR DMTK300 FOR
DESIGNER UNITS ON THE RATING LABEL ON THE LEFT SIDE WALL OF THE OVEN CAVITY.
VMTK270/271, VMTK300/301, OR VMTK360 FOR PROFESSIONAL UNITS AND DMTK270 OR DMTK300 FOR
DESIGNER UNITS ON THE RATING LABEL ON THE LEFT SIDE WALL OF THE OVEN CAVITY.
IF YOUR LOWER CONVENTIONAL OVEN IS NOT LISTED IN THE USE AND CARE MANUAL OF THE MICROWAVE
OVEN, THEN DO NOT INSTALL THE MICROWAVE OVEN ABOVE IT OR IN ANY AREA WHERE HEAT AND STEAM
ARE GENERATED; FOR EXAMPLE, NEXT TO OR ABOVE A CONVENTIONAL RANGE.
OVEN, THEN DO NOT INSTALL THE MICROWAVE OVEN ABOVE IT OR IN ANY AREA WHERE HEAT AND STEAM
ARE GENERATED; FOR EXAMPLE, NEXT TO OR ABOVE A CONVENTIONAL RANGE.
PARTS INCLUDED IN THE VMTK KIT
PARTS INCLUDED IN THE DMTK KIT
1) Front Frame Assembly
- QTY 1
2) Exhaust Duct Assembly
- QTY 1
3) Screw A (1/2” length)
- QTY 2
4) Screw B (1 3/4” length)
- QTY 4
1) Frame Assembly
- QTY 1
Front Frame Sub-Assembly;
Back Frame Sub-Assembly
Back Frame Sub-Assembly
2) Exhaust Duct Assembly
- QTY 1
3) Screw A (1/2” length)
- QTY 2
4) Screw B (1 1/2” length)
- QTY 4
5) Screw C (3/8” length)
- QTY 4
2