Vicks Air Cleaner v9070 ユーザーズマニュアル

ページ / 4
2
HOW
 
YOUR
 
AIR
 
PURIFIER
 
WORKS
:
This model air purifier incorporates a 4-stage 
cleaning system to help clean the air that passes 
through the filter in the unit (Fig. 1).
Stage 1: Washable Particle Pre-Filter
Stage 2: Carbon Filter
Stage 3: 99% HEPA Filter with ProTec™ 
antimicrobial treatment
Stage 4: Electronic Ionizer
SET
-
UP
:
• Select a firm, level and flat location. For proper 
airflow, locate the unit at least 3 feet (1 M) from 
any wall or furniture.
• When operating, large volumes of air are 
drawn toward the air purifier. Surrounding 
areas should be cleaned and/or vacuumed 
frequently to prevent build-up of dust and other 
contaminates. This may also help prolong the 
life of the filter. If the unit is placed on a light 
colored carpet, a small mat or rug should be 
used underneath to prevent permanent 
staining. This is especially important in homes 
with contamination from smoking or fireplaces.
INSTALL
 
MAIN
 
FILTER
:
The Filter is supplied within the air purifier. It is 
wrapped to ensure purity.
• Turn-off and unplug the air purifier. While 
pressing on the two notches along the front 
grille, pull the grille towards you and remove it 
(See Fig. 2).  Gently push down on the top filter 
frame and pull forward. 
• Remove the protective wrap from the Filter.
• Place back into the air purifier housing and 
snap filter grille into place.
OPERATION
:
• Ensure the air purifier is plugged into a working 
electrical outlet and the Power Knob and 
Ionizer Knob are OFF.
• Turn the Power Knob to the High position for 
several minutes and then rotate the Power 
Knob to the desired cleaning level (I = Low, 
II = Medium, III = High).
It is recommended you run your air purifier 24 
hours a day to ensure continuous cleaning. 
Portable air purifiers are more effective in 
rooms where all doors and windows are 
closed.
IONIZER
 
FEATURE
:
The Ionizer helps boost the performance of the air 
purifier and helps freshen the air.
• Turn the Ionizer Control Knob to the ON (I) 
position (see Fig. 3). This will power the Ionizer 
on. To turn the Ionizer feature off, simply turn 
the knob to the OFF (O) position.
NIGHTLIGHT
 
FEATURE
:
The nightlight provides soft illumination.
•  To turn the night light on, press the nightlight 
button (see Fig. 3).
•  To turn it off, press the nightlight button again.
Fig. 1
Fig. 2
Nightlight
 Button
Fig. 3
Power/Speed
Knob
Ionizer Control 
Knob
035-04007-001_R3 V9070 OM Eng.fm  Page 2  Tuesday, October 19, 2004  12:21 PM