Univex 5.4 ユーザーズマニュアル

You can program your remote control in Limited Mode to keep from 
accidentally changing the channel on your TV or VCR. When Limited 
Mode is enabled, you cannot select TV mode. If you press the TV 
button while TV mode is programmed in Limited Mode, the TV button 
flashes and the SAT button lights, telling you cannot switch to TV 
mode. The remote then moves back to SAT mode.

When you use the remote to control your TV in Limited Mode, you are 
only be able to use the POWER, MUTE, and VOLUME buttons to 
control your TV. Also, when you use the remote to control your VCR 
in Limited Mode, you are only be able to use the POWER and VCR 
function buttons. The section Programming Using the Equipment Code 
Tables (page 4) has a step that tells the remote control to go into 
Limited Mode. Also, a quick way to put the remote in Limited Mode is 
on page S-3, Placing Your Remote in Limited Mode. 

Note: Limited Mode cannot be used with audio amplifiers.

You can program your remote control in Fixed Channel Mode to 
automatically set the TV and/or VCR to a given channel when you 
press either RECOVER or the SAT button.  

Press and hold the TV or VCR mode button until all four mode 
lights illuminate.

Press the STAR key (*). Enter a channel, using two or three digits 
between 02 and 125. For example, to set channel 25, enter *25.

Press the POUND (#) key.  The TV or VCR mode button flashes 
three times.

Press and hold the TV or VCR mode button until all four mode 
lights illuminate.

Press the STAR (*) key followed by two zeros (*00).

Press the POUND (#) key. The TV or VCR mode button flashes 
three times.