Steelseries Zboard ZBD101 ユーザーズマニュアル
Zboard™ User Guide
13
System Requirements
In order to take full advantage of the Zboard™, your operating system requires the following
specifications and components:
specifications and components:
• IBM® PC or compatible system with 1,000MHZ Processor
• Windows® 2000 (SP3)/XP Home/Professional or Windows® Professional x64
• Windows® 2000 (SP3)/XP Home/Professional or Windows® Professional x64
Edition, Windows® Vista or Windows® Vista x64
• Available USB Port
• 200 MB Free Hard Drive Space
• 256 MB RAM
• 200 MB Free Hard Drive Space
• 256 MB RAM
Installing The Zboard™ Device
Installing the Zboard™ hardware involves working with two separate components: the
Zboard™ Base, and the Zboard™ Keyset(s). To clarify the process, it has been broken down
into two distinct steps.
Zboard™ Base, and the Zboard™ Keyset(s). To clarify the process, it has been broken down
into two distinct steps.
Step One: Insert a Keyset into the Zboard™ Base
1. Remove the Zboard™ Base from the packaging and unwrap the cable.
2. Remove a Zboard™ Keyset from the packaging. Note that the Keysets are
2. Remove a Zboard™ Keyset from the packaging. Note that the Keysets are
manufactured as three individual panels, joined together by hinges. In its folded
state, the Zboard™ Keyset looks like a three-layered mini-keyboard.
state, the Zboard™ Keyset looks like a three-layered mini-keyboard.
NOTE: If possible, insert the Standard Keyset for this operation. Full
QWERTY keys will simplify the installation process.
QWERTY keys will simplify the installation process.
3. Without unfolding the Zboard™ Keyset, take note of the three plastic tabs emerging
from the side of the bottom panel. These three tabs correspond with three slots in
the extreme left of the Zboard™ Base Cavity.
the extreme left of the Zboard™ Base Cavity.
4. Holding the folded Zboard™ Keyset in your right hand, insert the three plastic tabs
into the corresponding slots in the Zboard™ Base. Make sure the tabs are inserted
correctly and that the edge of the Keyset is flush with the edge of the Keyset Cavity.
correctly and that the edge of the Keyset is flush with the edge of the Keyset Cavity.