SMC Networks TIGERSWITCH SMC6752AL2 ユーザーズマニュアル

4-16

This command enables password checking at login. Use the no form to 
disable password checking and allow connections without a password.

login [local] 
no login

local - Selects local password checking. Authentication is based on 
the user name specified with the username command.

login local

Line Configuration 

• There are three authentication modes provided by the switch itself at 

login:
- login selects authentication by a single global password as specified 

by the password line configuration command. When using this 
method, the management interface starts in Normal Exec (NE) 
mode.

- login local selects authentication via the user name and password 

specified by the username command (i.e., default setting). When 
using this method, the management interface starts in Normal Exec 
(NE) or Privileged Exec (PE) mode, depending on the user’s 
privilege level (0 or 15 respectively). 

- no login selects no authentication. When using this method, the 

management interface starts in Normal Exec (NE) mode.

• This command controls login authentication via the switch itself. To 

configure user names and passwords for remote authentication 
servers, you must use the RADIUS or TACACS software installed on 
those servers.