SMC Networks TIGERSWITCH SMC6752AL2 ユーザーズマニュアル
S
YSTEM
D
EFAULTS
1-7
System Defaults
The switch’s system defaults are provided in the configuration file
“Factory_Default_Config.cfg.” To reset the switch defaults, this file
should be set as the startup configuration file (page 3-23).
“Factory_Default_Config.cfg.” To reset the switch defaults, this file
should be set as the startup configuration file (page 3-23).
The following table lists some of the basic system defaults.
Table 1-2 System Defaults
Function
Parameter
Default
Console Port
Connection
Baud Rate
9600
Data bits
8
Stop bits
1
Parity
none
Local Console Timeout
0 (disabled)
Authentication
Privileged Exec Level
Username “admin”
Password “admin”
Normal Exec Level
Username “guest”
Password “guest”
Enable Privileged Exec
from Normal Exec Level
Password “super”
RADIUS Authentication
Disabled
TACACS Authentication
Disabled
802.1X Port
Authentication
Disabled
HTTPS
Enabled
SSH
Disabled
Port Security
Disabled
IP Filtering
Disabled