SMC Networks TIGERSWITCH SMC6752AL2 ユーザーズマニュアル

ページ / 516
A
UTHENTICATION
 C
OMMANDS
4-111
• In “multi-host” mode, only one host connected to a port needs to pass 
authentication for all other hosts to be granted network access. 
Similarly, a port can become unauthorized for all hosts if one attached 
host fails re-authentication or sends an EAPOL logoff message.
Example
dot1x re-authenticate
This command forces re-authentication on all ports or a specific interface.
Syntax
dot1x re-authenticate [interface]
interface
• ethernet unit/port
-  unit - Stack unit. (This is unit 1) 
-  port - Port number. (Range: 1-52)
Command Mode
Privileged Exec
Example
dot1x re-authentication
This command enables periodic re-authentication globally for all ports. 
Use the no form to disable re-authentication.
Syntax
[no] dot1x re-authentication
Command Mode
Interface Configuration
Console(config)#interface eth 1/2
Console(config-if)#dot1x operation-mode multi-host max-count 10 
Console(config-if)#
Console#dot1x re-authenticate
Console#