SMC Networks TIGERSWITCH SMC6752AL2 ユーザーズマニュアル

4-148

Example 
The following example configures port 11 to use autonegotiation.

This command advertises the port capabilities of a given interface during 
autonegotiation. Use the no form with parameters to remove an advertised 
capability, or the no form without parameters to restore the default values.

[no] capabilities {1000full | 100full | 100half | 10full | 10half | 

flowcontrol | symmetric}

• 1000full - Supports 1000 Mbps full-duplex operation 
• 100full - Supports 100 Mbps full-duplex operation 
• 100half - Supports 100 Mbps half-duplex operation 
• 10full - Supports 10 Mbps full-duplex operation 
• 10half - Supports 10 Mbps half-duplex operation 
• flowcontrol - Supports flow control 
• symmetric (Gigabit only) - When specified, the port transmits and 

receives pause frames; when not specified, the port will 
auto-negotiate to determine the sender and receiver for asymmetric 
pause frames. (The current switch ASIC only supports symmetric pause 
frames.)

• 100BASE-TX: 10half, 10full, 100half, 100full
• 1000BASE-T: 10half, 10full, 100half, 100full, 1000full
• SFP: 1000full 

Interface Configuration (Ethernet, Port Channel)

Console(config)#interface ethernet 1/11
Console(config-if)#negotiation
Console(config-if)#