SMC Networks TIGERSWITCH SMC6752AL2 ユーザーズマニュアル
C
OMMAND
L
INE
I
NTERFACE
4-198
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Editing VLAN Groups
vlan database
This command enters VLAN database mode. All commands in this mode
will take effect immediately.
will take effect immediately.
Default Setting
None
Table 4-51 VLANs
Command Groups
Function
Page
Editing VLAN Groups Sets up VLAN groups, including name, VID
and state
Configuring VLAN
Interfaces
Interfaces
Configures VLAN interface parameters,
including ingress and egress tagging mode,
ingress filtering, PVID, and GVRP
including ingress and egress tagging mode,
ingress filtering, PVID, and GVRP
Displaying VLAN
Information
Information
Displays VLAN groups, status, port members,
and MAC addresses
and MAC addresses
Configuring Private
VLANs
VLANs
Configures private VLANs, including uplink
and downlink ports
and downlink ports
Table 4-52 Editing VLAN Groups
Command
Function
Mode
Page
vlan database
Enters VLAN database mode to add, change,
and delete VLANs
and delete VLANs
GC
vlan
Configures a VLAN, including VID, name
and state
and state
VC