SmartBridges sB3010 ユーザーズマニュアル

 

 

 

Page 35 of 80 

 

i n t e l l i g e n t     w i r e l e s s     p l a t f o r m

 

airHaul™ Nexus User Guide

 

 
The airHaul units can also be configured to operate as a Remote device to associate with Root 
Bridge. In Remote mode, the unit can operate as a bridge or a router. 
 
Follow the steps in section 2.7.1 to 2.7.5 to configure the device in Remote Bridge mode

. 

 

The Ethernet IP is configured during the operational mode change to Remote Bridge mode. 
 
Follow these steps below if you need to re-configure the Remote Bridge Ethernet parameters:  

 

1. From 

the 

Summary Information page, click on the Ethernet Configuration link to change 

Ethernet parameters.   

 
2.  Enable or disable the DHCP by clicking the check box.  Enter the ‘IP address’,  ‘IP mask’, 

‘Gateway’ for non DHCP.  Give the unit a unique IP Address on the same IP subnet (e.g. 
192.168.0.100) as the Root Bridge unit. 

 

3.  Click on the ‘Apply Changes’ button to change the settings.