Simaudio HDS-8 ユーザーズマニュアル

 

Connecting the HDS-8 

 

 

 
 
 

 

 

 

 
 

 

Figure 3:  Connecting the MOON HDS-8 and the MOON CP-8 

 

1. 

The MOON HDS-8 is intended for use with the MOON CP-8 Reference Surround Preamplifier/Processor. Consequently, 
this section will desrcibe the recommended connection scenario with the CP-8. However, you may use your HDS-8 with 
another Surround Preamplifier/Processor in a similar manner. 

2. 

Connect your HDMI audio/video source components to the ‘HDMI IN’ connectors ‘1’ through ‘5’.  

 

3. 

Then connect the “HDMI OUT” on the HDS-8  to either the ‘HDMI IN 1’ or ‘HDMI IN 2’ on the CP-8’s rear panel. We 
recommend using the CP-8’s HDMI input labelled ‘HDMI IN 2’ and connecting a DVD player to the ‘HDMI IN 1’ input as 
per factory default settings. 

4. 

Connect the HDS-8’s 12V trigger input to one of the CP-8’s 12V trigger outputs. 

 

5. 

Connect the supplied AC power cable to the IEC receptacle, located on the switcher’s rear panel. Ensure that the AC wall 
outlet you use has a functioning ground.  For the best sonic performance, it is preferable that you plug your HDS-8 
directly into a dedicated AC outlet and avoid using an extension cord.  

 

6. 

In order to obtain the maximum performance from your Home-theater system, we strongly recommend that the 
detachable power cord not come into physical contact with any of the HDMI cables running to and from your HDS-8.   

 

____________________________________________________________________________________ 

 

Connecting The HDS-8 

 

 

                                         

 

                8