Sima Products Universal Remote SUR-20 ユーザーズマニュアル

 

The touch screen buttons enable you to operate the SUR-20. 
Use these buttons to program codes from your existing 
remotes, control your devices and set up command 
sequences called macros. You will hear a beep when you 
press a button. To activate or deactivate the beep, press any 
device button twice. (For more info see Chpt. 8) The SUR-20 
will turn itself off 20 minutes after the last use. 
 

 

 

 

   To prevent accidental activation, the record button has a three 

second safety delay. To instruct any device to record, you must press and 
hold the REC button for three seconds.  

LEARN  - DELETE - MACRO -TRANS:

 

These four buttons activate program 
modes that enable the SUR-20 to 
perform advanced functions.  
TRANS button used only with optional 
link cable - see Appendix A. 
 
Control buttons:  
After programming, these buttons 
operate devices in your home.  The 
LCD shows a different set of control 
buttons for each device. These buttons 
control functions such as: volume, play, 
power off/on and more for your VCRs, 
DVDs, TVs, etc…  * 
 
Device buttons:  
These eight buttons select the device 
you want to use. After pressing a 
device button, a corresponding set of 
control buttons will appear. An icon 
indicates which device is active.  In the 
figure at left, TV is selected.