Siemens Outboard Motor S120 ユーザーズマニュアル
Motor components of the built-in motor and options
3.3 Cooling
3.3.1
Cooling circuits
Cooling circuit requirements
We recommend that the cooling circuits be designed as closed systems, to prevent the
growth of algae. The maximum permissible pressure is 10 bar.
Note
We do not recommend that the cooling circuits of machines are also used to cool the motors:
We do not recommend that the cooling circuits of machines are also used to cool the motors:
Due to accumulated dirt and long-term deposits, blockage may result! This especially applies
to cooling-lubricating medium circuits.
If the cooling circuits of the machines are also used to cool the motors, then they must fulfill
all of the requirements listed here. Also note the demands on the cooling medium as well as
the maximum standstill times of cooling circuits according to the specifications of the cooling
medium manufacturer!
Materials used in the cooling circuits of torque motors
Table 3- 4
Materials in the cooling circuits of torque motors (not including the material used for the connections)
Cooling jacket
for
1FW609, 1FW613 and
for
1FW609, 1FW613 and
1FW615
Integrated cooling (main
cooler) for
1FW616 to 1FW629
1FW616 to 1FW629
Integrated cooling (precision
cooler) for
1FW616 to 1FW629
1FW616 to 1FW629
Cooling connection adapter
for
1FW616 to 1FW629
1FW616 to 1FW629
1FW609, 1FW613:
EN AW-5083
(EN 573-3)
Viton® (FPM) gasket
1FW615:
S355J2G3
(EN 10025)
Viton® (FPM) gasket
X6CrNiTi18-10
(EN 10088)
SF-Cu
(DIN 17671)
CW617N
(DIN EN 12165)
Viton® (FPM) gasket
Silicon hose
Ag 102
(EN 1045) +
welding flux EN 1045-
FH10
X6CrNiTi18-10
(EN 10088)
SF-Cu
(DIN 17671)
CW617N
(DIN EN 12165)
Viton® (FPM) gasket
Silicon hose
CW617N
(DIN EN 12165)
Viton® (FPM) gasket
Calculating the thermal power that can be dissipated by the cooler
Average density of the coolant:
ρ
in kg/m
3
Average specific heat capacity of the coolant:
c
p
in J/(kg K)
Temperature deviation vis-à-vis the inlet temperature:
ΔT in K
Volume flow rate:
in m
3
/s
1FW6 Built-in torque motors
50
Configuration Manual, 05/2009, 6SN1197-0AE00-0BP3