Siemens Network Hardware SM2 monitoring system ユーザーズマニュアル
U3585-J-Z125-8-76
123
Statements for SM2 administrators
SET-DISK-PARAMETER
SET-DISK-PARAMETER
Define DISK monitoring parameters
Define DISK monitoring parameters
Function
This statement is used to define the disk devices for the DISK monitoring program.
Format
Operands
DEVICES = list-poss(256): <alphanum-name 2..4 with-wild>
Specifies the mnemonic device names of the disk devices to be monitored. A check is
carried out to establish whether these disk devices are defined in the configuration and are
in the “attached” state. An asterisk (*) is also permitted as the last character in a wildcard
specification.
Specifies the mnemonic device names of the disk devices to be monitored. A check is
carried out to establish whether these disk devices are defined in the configuration and are
in the “attached” state. An asterisk (*) is also permitted as the last character in a wildcard
specification.
Note
Up to 256 devices are monitored. If partial qualification means than more than 256
devices are defined, these are selected in the following order of priority:
devices are defined, these are selected in the following order of priority:
–
devices whose mnemonic device names have been specified in their entirety
–
devices whose mnemonic device names have been specified in partially qualified
form
form
–
the sequence in the PDT (Physical Device Table)
SET-DISK-PARAMETER