Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル
AT Command Set
MC35_ATC_01_V04.00
Page 130 of 238
02.04.2002
Parameter
<dt>
GSM 03.40 TP-Discharge-Time in time-string format: “yy/MM/
dd,hh:mm:ss±zz”, where characters indicate year (two last digits),
month, day, hour, minutes, seconds and time zone. For example,
6th of May 1994, 22:10:00 GMT+2 hours equals
“94/05/06,22:10:00+08”
dd,hh:mm:ss±zz”, where characters indicate year (two last digits),
month, day, hour, minutes, seconds and time zone. For example,
6th of May 1994, 22:10:00 GMT+2 hours equals
“94/05/06,22:10:00+08”
<fo>
depending on the command or result code: first octet of GSM 03.40
SMS-DELIVER, SMS-SUBMIT (default 17), SMS- STATUS-
REPORT, or SMS -COMMAND (default 2) in integer format
SMS-DELIVER, SMS-SUBMIT (default 17), SMS- STATUS-
REPORT, or SMS -COMMAND (default 2) in integer format
<length> integer type value indicating in the text mode (+CMGF=1) the length
of the message body <data> (or <cdata>) in characters; or in PDU
mode (+CMGF=0), the length of the actual TP data unit in octets
(i.e. the RP layer SMSC address octets are not counted in the
length)
mode (+CMGF=0), the length of the actual TP data unit in octets
(i.e. the RP layer SMSC address octets are not counted in the
length)
<index> integer type; value in the range of location numbers supported by
the associated memory
<mid>
GSM 03.41 CBM Message Identifier in integer format
<mr>
GSM 03.40 TP-Message-Reference in integer format
<oa>
GSM 03.40 TP-Originating-Address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <tooa>
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <tooa>
<pages> GSM 03.41 CBM Page Parameter bits 0-3 in integer format
<pdu>
<pdu>
In the case of SMS: GSM 04.11 SC address followed by GSM 03.40
TPDU in hexadecimal format: ME/TA converts each octet of TP data
unit into hexadecimal numbers containing two IRA characters (e.g.
octet with integer value 42 is presented to TE as two characters 2A
(IRA 50 and 65)). In the case of CBS: GSM 03.41 TPDU in hexa-
decimal format.
TPDU in hexadecimal format: ME/TA converts each octet of TP data
unit into hexadecimal numbers containing two IRA characters (e.g.
octet with integer value 42 is presented to TE as two characters 2A
(IRA 50 and 65)). In the case of CBS: GSM 03.41 TPDU in hexa-
decimal format.
<page>
GSM 03.41 CBM Page Parameter bits 4-7 in integer format
<ra>
GSM 03.40 TP-Recipient-Address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <tora>
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <tora>
<scts>
GSM 03.40 TP- Service-Centre-Time-Stamp in time-string format
(refer <dt>)
(refer <dt>)
<sn>
GSM 03.41 CBM Serial Number in integer format
<st>
GSM 03.40 TP-Status in integer format
<toda>
GSM 04.11 TP-Destination-Address Type-of-Address octet in inte-
ger format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)
ger format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)
<tooa>
GSM 04.11 TP-Originating-Address Type-of-Address octet in inte-
ger format (default refer<toda>)
ger format (default refer<toda>)
<tora>
GSM 04.11 TP-Recipient-Address Type-of-Address octet in integer
format (default refer<toda>)
format (default refer<toda>)
Reference
GSM 07.05
Note