Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル
AT Command Set
MC35_ATC_01_V04.00
Page 133 of 238
02.04.2002
used, and 140 characters according to the 8 bit GSM coding scheme.
<index> integer type; value in the range of location numbers supported by the
associated memory
<mid>
GSM 03.41 CBM Message Identifier in integer format
<mr>
GSM 03.40 TP-Message-Reference in integer format
<oa>
GSM 03.40 TP-Originating-Address Address-Value field in string for-
mat; BCD numbers (or GSM default alphabet characters) are converted
into characters; type of address given by <tooa>
mat; BCD numbers (or GSM default alphabet characters) are converted
into characters; type of address given by <tooa>
<page>
GSM 03.41 CBM Page Parameter bits 4-7 in integer format
<pages> GSM 03.41 CBM Page Parameter bits 0-3 in integer format
<pdu>
In the case of SMS: GSM 04.11 SC address followed by GSM 03.40
TPDU in hexadecimal format: ME/TA converts each octet of TP data unit
into hexadecimal numbers containing two IRA characters (e.g. octet with
integer value 42 is presented to TE as two characters 2A (IRA 50 and
65)). In the case of CBS: <ra> GSM 03.40 TP-Recipient-Address Ad-
dress-Value field in string format; BCD numbers (or GSM default alpha-
bet characters) are converted into characters; type of address given by
<tora>
TPDU in hexadecimal format: ME/TA converts each octet of TP data unit
into hexadecimal numbers containing two IRA characters (e.g. octet with
integer value 42 is presented to TE as two characters 2A (IRA 50 and
65)). In the case of CBS: <ra> GSM 03.40 TP-Recipient-Address Ad-
dress-Value field in string format; BCD numbers (or GSM default alpha-
bet characters) are converted into characters; type of address given by
<tora>
<pid>
GSM 03.40 TP-Protocol-Identifier in integer format (default 0)
<ra>
GSM 03.40 TP-Recipient-Address Address-Value field in string format;
BCD numbers (or GSM default alphabet characters) are converted to
characters of the currently selected TE character set (refer command
AT+CSCS Select TE character set.); type of address given by <tora>
BCD numbers (or GSM default alphabet characters) are converted to
characters of the currently selected TE character set (refer command
AT+CSCS Select TE character set.); type of address given by <tora>
<sca>
GSM 04.11 RP SC address Address-Value field in string format; BCD
numbers (or GSM default alphabet characters) are converted to char-
acters of the currently selected TE character set (refer command
AT+CSCS Select TE character set); type of address given by <tosca>
numbers (or GSM default alphabet characters) are converted to char-
acters of the currently selected TE character set (refer command
AT+CSCS Select TE character set); type of address given by <tosca>
<scts>
GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format (refer
<dt>)
<dt>)
<sn>
GSM 03.41 CBM Serial Number in integer format
<st>
GSM 03.40 TP-Status in integer format
<toda>
GSM 04.11 TP-Destination-Address Type-of-Address octet in integer
format (when first character of <da> is + (IRA 43) default is 145, other-
wise default is 129)
format (when first character of <da> is + (IRA 43) default is 145, other-
wise default is 129)
<tooa>
GSM 04.11 TP-Originating-Address Type-of-Address octet in integer
format (default refer<toda>)
format (default refer<toda>)
<tora>
GSM 04.11 TP-Recipient-Address Type-of-Address octet in integer for-
mat (default refer<toda>)
mat (default refer<toda>)
<tosca> GSM 04.11 RP SC address Type-of-Address octet in integer format
(default refer <toda>)
<vp>
depending on SMS-SUBMIT <fo> setting: GSM 03.40 TP-Validity-Period
either in integer format (default 167) or in time-string format (refer <dt>)
either in integer format (default 167) or in time-string format (refer <dt>)
Reference
GSM 07.05
Note
Response to a CMGR to an empty record index: +CMGR: 0,,0
Response to a CMGR to a not existing record index: +CMS ERROR: invalid
memory index
Response to a CMGR to a not existing record index: +CMS ERROR: invalid
memory index