Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル

MC35_ATC_01_V04.00

Page 154 of 238

02.04.2002

Test command

AT+CGQMIN=?

The test command returns values supported as a compound value. If the
MT supports several PDP types, the parameter value ranges for each PDP
type are returned on a separate line.

Response

+CGQMIN: <PDP_type>, (list of supported <precedence>s), (list of sup-
ported  <delay>s), (list of supported <reliability>s) , (list of supported
<peak>s), (list of supported <mean>s) [<CR><LF>+CGQMIN: ...]
OK/ERROR/+CME ERROR

Parameter

String parameter of Packet Data Protocol type
IP

See write command

See write command

See write command

See write command

See write command

Read command

AT+CGQMIN?

Response

The read command returns the current settings for each defined context. If
no minimum profile was explicitly specified for a context, simply OK will be
returned, but default values will be used for that context.

+CGQMIN: <cid>, <precedence>, <delay>, <reliability>, <peak>, <mean>
[<CR><LF>+CGQMIN: ...]
OK/ERROR/+CME ERROR

Parameter

See write command

See write command

See write command

See write command

See write command

See write command

Write command

AT+CGQMIN=
[<cid>[,<precedence>
[,<delay>[,<reliability>
[,<peak>[,<mean>]]]]]]

This command allows the TE to specify a minimum acceptable profile
which is checked by the MT against the negotiated profile returned in the
Activate PDP Context Accept message.
The set command specifies a profile for the context identified by the (local)
context identification parameter, <cid>.
A special form of the set command, +CGQMIN= <cid> causes the mini-
mum acceptable profile for context number <cid> to become undefined. In
this case no check is made against the negotiated  profile.
AT&F and ATZ will undefine the minimum QoS profiles of every context
which is not active or not online.