Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル

MC35_ATC_01_V04.00

Page 179 of 238

02.04.2002

Test command

AT^SACM=?

Response

^SACM: (list of supported <n>s) OK

Parameter

See write command

Execute command

AT^SACM

The execute command can be used to query the current mode of the Advice of
Charge supplementary service, the SIM values of the accumulated call meter
(ACM) and accumulated call meter maximum (ACMmax).

Response

^SACM: <n>,<acm>,<acm_max> OK
If error is related to ME functionality:
+CME ERROR: <err>

Parameter

See write command

ACM, string type; three bytes of the current ACM value in hexadeci-
mal format (e.g. “00001E” indicates decimal value 30) 000000–
FFFFFF

<acm_max> ACMmax, string type; three bytes of the max. ACM value in hexade-

cimal format (e.g. “00001E” indicates decimal value 30) 000000 dis-
able ACMmax feature 000001-FFFFFF

string type; three bytes of the current CCM value in hexadecimal for-
mat (e.g. “00001E” indicates decimal value 30); bytes are coded in
the same way as ACMmax value in the SIM 000000-FFFFFF

Write command

AT^SACM=<n>

The write command enables or disables the presentation of unsolicited result to
report the call charges.

Response

OK or if error is related to ME functionality: +CME ERROR: <err>

Parameter

0

suppress unsolicited result code

1

display unsolicited result code

When you power down or reset the ME with AT+CFUN=1,1 the URC
presentation mode will be reset to its default. To benefit from the
URC it is recommended to have the setting included in the user pro-
file saved with AT&W, or to select <n>=1 every time you reboot the
ME.

Unsolicited result code

When activated, an unsolicited result code is sent when the CCM value changes,
but not more often than every 10 seconds
+CCCM: <ccm>

Reference

Siemens

Note

See also GSM07.07: AT+CACM, AT+CAMM, AT+CAOC