Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル
AT Command Set
MC35_ATC_01_V04.00
Page 214 of 238
02.04.2002
9 APPENDIX
9.1 Summary of ERRORS and Messages
The final result codes +CME ERROR: <err> and +CMS ERROR: <err> indicate errors related to mo-
bile equipment or network. The effect is similar to an ERROR result code.
bile equipment or network. The effect is similar to an ERROR result code.
A final result error code terminates the execution of the command and prevents the execution of all
remaining commands that may follow on the same command line. If so, neither ERROR nor OK result
code are returned. A 30 seconds timeout causes ERROR to be returned when the input of a command
is not complete.
remaining commands that may follow on the same command line. If so, neither ERROR nor OK result
code are returned. A 30 seconds timeout causes ERROR to be returned when the input of a command
is not complete.
The format of <err> can be either numeric or verbose. This is set with the AT+CMEE command (see
Chapter 4.26).
Chapter 4.26).
9.1.1 Summary of CME ERRORS related to GSM 07.07
Code of <err>
Meaning
0
phone failure
1
no connection to phone
2
phone-adapter link reserved
3
Operation not allowed
4
Operation not supported
5
PH-SIM PIN required
6
PH-FSIM PIN required
7
PH-FSIM PUK required
10
SIM not inserted
11
SIM PIN required
12
SIM PUK required
13
SIM failure
14
SIM busy
15
SIM wrong
16
Incorrect password
17
SIM PIN2 required
18
SIM PUK2 required
20
Memory full
21
invalid index
22
not found
23
Memory failure
24
text string too long
25
invalid characters in text string
26
dial string too long
27
invalid characters in dial string
30
no network service
31
Network timeout
32
Network not allowed emergency calls only
40
Network personalization PIN required
41
Network personalization PUK required