Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル
AT Command Set
MC35_ATC_01_V04.00
Page 22 of 238
02.04.2002
2.10 ATDL Redial last telephone number used
Execute command
ATDL[;]
This command redials the last voice and data call number used in the ATD com-
mand.
• To redial the last data call number simply enter ATDL
mand.
• To redial the last data call number simply enter ATDL
• To redial the last voice call number type ATDL;
Note:
The command may be aborted generally by receiving a character during
execution. This command cannot be aborted in some connection setup
states, such as handshaking.
execution. This command cannot be aborted in some connection setup
states, such as handshaking.
Response
If there is no last number or number is not valid:
+CME ERROR
+CME ERROR
If no dialtone (parameter setting ATX2 or ATX4):
NO DIALTONE
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
BUSY
If a connection cannot be set up:
NO CARRIER
NO CARRIER
If successfully connected and non-voice call:
CONNECT<text> TA switches to data state.
CONNECT<text> TA switches to data state.
Note:
<text> output only if +ATX parameter setting with value > 0.
When TA returns to command mode after call release:
OK
OK
If successfully connected and voice call:
OK
OK
Parameter
<;>
voice call
Reference
V.25ter
Note
In case of voice calls “;” is necessary.