Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル

MC35_ATC_01_V04.00

Page 99 of 238

02.04.2002

Test command

AT+CPBS=?

Response

 (list of supported <storage>s) OK

If error is related to ME functionality:
+CME ERROR: <err>

Parameter

See write command

Read command

AT+CPBS?

Response

TA returns currently selected memory:
+CPBS: <storage>,<used>,<total> OK

If error is related to ME functionality:
+CME ERROR: <err>

Parameter

See write command

Write command

AT+CPBS=
<storage>

Response

TA selects current phonebook memory storage, which is used by other phone-
book commands.
OK
If error is related to ME functionality:
+CME ERROR: <err>

Parameter

“SM” SIM phonebook (storage depends on SIM Card)
“FD” SIM fixdialling phonebook (FD Phonebook storage pos.1-7).

If the mobile is locked to FD, only the numbers stored to the
FD memory can be dialled. To edit the FD phonebook PIN 2
is required. See AT+CLCK  Facility lock and AT^SLCK  Fa-
cility lock.

“LD” SIM last-dialling-phonebook (LD Phonebook storage pos.1-

10) (+CPBW not be applicable to this storage)

“MC” ME missed (unanswered received) calls) (MC Phonebook

storage pos.1-10) list (+CPBW not applicable to this storage

“RC” ME received calls list (+CPBW not applicable for this stor-

age) (RC Phonebook storage pos.1-10)

“ON” SIM (or ME) own numbers (MSISDNs) list
“ME” ME Phonebook (storage pos.1-50)

<used> 

Integer type value indicating the number of used locations in se-
lected memory

Integer type value indicating the maximum number of locations al-
lowed in the selected memory

Reference

GSM 07.07

Note

This command can be used right after power-on to get selected <storage>.
Since data need to be loaded from the SIM, values of <used> and <total> might
not be available for the first 20 seconds.