Siemens AT Command Set Cellular Engines Wireless Modules MC35 ユーザーズマニュアル
AT Command Set
MC35_ATC_01_V04.00
Page 154 of 238
02.04.2002
6.1.5 AT+CGQMIN Quality of Service Profile (Minimum acceptable)
Test command
AT+CGQMIN=?
The test command returns values supported as a compound value. If the
MT supports several PDP types, the parameter value ranges for each PDP
type are returned on a separate line.
MT supports several PDP types, the parameter value ranges for each PDP
type are returned on a separate line.
Response
+CGQMIN: <PDP_type>, (list of supported <precedence>s), (list of sup-
ported <delay>s), (list of supported <reliability>s) , (list of supported
<peak>s), (list of supported <mean>s) [<CR><LF>+CGQMIN: ...]
OK/ERROR/+CME ERROR
ported <delay>s), (list of supported <reliability>s) , (list of supported
<peak>s), (list of supported <mean>s) [<CR><LF>+CGQMIN: ...]
OK/ERROR/+CME ERROR
Parameter
<PDP_type>
String parameter of Packet Data Protocol type
IP
IP
<precedence>
See write command
<delay>
See write command
<reliability>
See write command
<peak>
See write command
<mean>
See write command
Read command
AT+CGQMIN?
Response
The read command returns the current settings for each defined context. If
no minimum profile was explicitly specified for a context, simply OK will be
returned, but default values will be used for that context.
no minimum profile was explicitly specified for a context, simply OK will be
returned, but default values will be used for that context.
+CGQMIN: <cid>, <precedence>, <delay>, <reliability>, <peak>, <mean>
[<CR><LF>+CGQMIN: ...]
OK/ERROR/+CME ERROR
[<CR><LF>+CGQMIN: ...]
OK/ERROR/+CME ERROR
Parameter
<cid>
See write command
<precedence>
See write command
<delay>
See write command
<reliability>
See write command
<peak>
See write command
<mean>
See write command
Write command
AT+CGQMIN=
[<cid>[,<precedence>
[,<delay>[,<reliability>
[,<peak>[,<mean>]]]]]]
[<cid>[,<precedence>
[,<delay>[,<reliability>
[,<peak>[,<mean>]]]]]]
This command allows the TE to specify a minimum acceptable profile
which is checked by the MT against the negotiated profile returned in the
Activate PDP Context Accept message.
The set command specifies a profile for the context identified by the (local)
context identification parameter, <cid>.
A special form of the set command, +CGQMIN= <cid> causes the mini-
mum acceptable profile for context number <cid> to become undefined. In
this case no check is made against the negotiated profile.
AT&F and ATZ will undefine the minimum QoS profiles of every context
which is not active or not online.
which is checked by the MT against the negotiated profile returned in the
Activate PDP Context Accept message.
The set command specifies a profile for the context identified by the (local)
context identification parameter, <cid>.
A special form of the set command, +CGQMIN= <cid> causes the mini-
mum acceptable profile for context number <cid> to become undefined. In
this case no check is made against the negotiated profile.
AT&F and ATZ will undefine the minimum QoS profiles of every context
which is not active or not online.