Servis Washer/Dryer WASHER DRYER ユーザーズマニュアル

T: 0800 0124 382

T: 0800 0124 382

   Screw the straight end of the hose clockwise to a 19mm (3/4’’) cold water tap until hand 

tight (fig 8). Take care not to trap or kink the hose.

       

 

Do not connect your Washer Dryer to a surface water drain.

Connect your Washer Dryer to your household drainage system (fig 9).

For your Washer Dryer to function properly the outlet end of the drain hose must be at a 

minimum of 60cm and a maximum of 100cm from the ground.

CAUTION:

 Check to ensure that the hose is not trapped, kinked, twisted, folded or crushed. 

Do not attempt to extend the drain hose by adding extra sections.

Figure 8

Figure 9

Max height 80cm

Min height 0cm

a: The drain hose 

can be connected 

to a standpipe, as 

shown. The hose 

must be between 

0cm and 80cm 

from the ground.

b: The drain hose

can be connected 

to a household 

sink, as shown. 

The hose must be 

between 60cm to 

100cm from the 

ground.