Sennheiser Sound Field System EMP 2015 ユーザーズマニュアル

ページ / 68
68
Problem
Possible cause
What to do
Dropouts

Antenna sensitivity is not sufficient

Use a remote or telescopic
Speaker’s voice overlaid
antenna
with background noise

Transmitting antenna is not connected

Connect the antenna

Connection of transmitting antenna

Screw the antenna tight
has worked loose

Transmission frequency is not the

Set the transmitter and the
same as the receiving frequency
receiver section to the same
frequency
(
 “Special adjustments”)
Sound is not clear / rough

Several transmitters in the same

Check the frequency settings
room or in neighboring rooms
(
 “Special adjustments”)

Microphone is covered or

Position the microphone at
positioned too far from the mouth
the corner of the mouth

Transmission frequency is not the

Set the transmitter and the
same as the receiving frequency
receiver section to the same
frequency
(
 “Special adjustments”)
If problems occur that are not listed in the above table, please contact
your local Sennheiser agent for assistance.