Sanus Systems JFBD1 ユーザーズマニュアル

ページ / 5
Supplied Parts and Hardware
Sanus Systems makes every effort to assure all necessary hardware is included. Check carefully to make sure that there 
are no missing or defective parts. Never use defective parts. If hardware is missing or damaged, contact Sanus Systems or 
consult your local hardware store. Contact Sanus Systems before returning products to the point of purchase. Replacement 
parts for products purchased through authorized dealers will be shipped directly to you.
Threaded fasteners are shown actual size.
Required Tools: Phillips screwdriver, drill, and a 5/16″ diameter drill bit
NoTe
If you purchased the Java JFV65 Lowboy prior to buying the JFBD1, you may need the Sanus JFRU Update 
Kit to properly assemble your furniture. Look for two sets of threaded inserts on both sides of the back of 
the Lowboy as shown in Figure 2. If no inserts are present, contact Sanus Customer Service. 
Assembly Instructions for Model: JFBD1
Thank you for choosing the Java Furniture Line from Sanus Systems. The JFBD1  
joins to Java Furniture Model JFV65 and serves as a backdrop for mounting 
Sanus Wall Mount models VMPL50, VMPL250, VMPL, VMPL2, or VMPL3.
wARNINg
Do  not  use  this  product  for  any  purpose  that  is  not  explicitly 
specified  by  Sanus  Systems.  Improper  installation  may  cause 
property damage or personal injury. If you do not understand these 
directions or have any doubts about the safety of the installation, 
call  a  qualified  contractor  or  contact  Sanus  at  800.359.5520  or 
www.sanus.com.  Sanus  Systems  can  not  be  liable  for  damage 
or  injury  caused  by  incorrect  mounting,  incorrect  assembly,  or 
incorrect use.
CAUTIoN
The combined weight of your television and wall mount must not 
exceed 130 lb (59 kg).  
Sanus Systems  2221 Hwy 36 West, Saint Paul, MN 55113  09.27.06 (6901-100104)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Top Backboard – A
Qty 1
Bottom Backboard – B
Qty 1
M8 x 40 mm Screw – D
Qty 4
Backboard Joining Plate – C
Qty 4
¼-20 x 0.5″ Screw – E
Qty 24
¼″ Lock Washer – F
Qty 24