Rugged Outback ELX4-60 ユーザーズマニュアル

- To set relay on/off. (ELX4 -60 supports four relay outputs.) 

- Press the [SEARCH/RELAY] button. 

- The icon of “Relay On” shows.   

- Press the relay number button between 1 and 4, and then the related relay out signal will be transmitted.  

- In order to set relay off, press the [SEARCH/RELAY] button again.  

- Then “Relay On ” sh ows because relay keeps being set as on. 

- Press the [SEARCH/RELAY] button again, and then the icon of  “Relay Off” will show. 

- Press the relay a number button to set off.   

 

- To set screen lock. 

- For this function, user password should  be set at first. 

- If pressing the [EXIT/LOCK] button for 2~3 seconds, lock mode will run with showing  “Screen 

Locked” message. 

- If lock mode runs, any function button will not be operated.  

- In order to cancel lock mode, user password should be entered. 

 

 

 

- Press the Play [

] button during monitoring mode. 

- Play [

] button will begin playback of the last 1minut e, 45 seconds of recorded video at 1X speed. 

 

 

 

 

 

When pressing the play button in multi-monitoring mode, channel 1 is always the channel displayed. 

More specifically, images recorded on Channel 1 during the last 30 seconds  are always displayed. 

However pressing the  playback  button in single-channel monitoring mode,  will display the selected 

channel. To display another channel, press the corresponding number button on the front of  ELX4-60.