Rugged Outback ELX4-60 ユーザーズマニュアル
BASIC CONFIGURATION
ELX4 -60
Rugged CCTV
2003.05.21 (v 1.0)
31
5.4. Alarm Rec. – Analog Camera Channels (Ch. 1 ~ Ch. 4)
This menu is to configure for the setting s for alarm recording condition s. To activate this schedule, set
“Event Recording” under the “Normal Recording” tab to “On.”
MD
Choose from among four sensitivity conditions; Off, Low, Standard, High.
MD Area
Customize the MD area.
Default value is “Select All”. Select “Custom Area” to remove certain blocks from detecting motion.
Sensor 1/2/3/4
The ELX4-60 will only work with NO (Normal Open) sensors. If sensors are connected, turn each sensor
“On.”