Rugged Outback ELX4-60 ユーザーズマニュアル

ELX4 -60

BASIC CONFIGURATION

2003.05.21 (v 1.0)

Rugged CCTV

5.5. Relay

This menu is to set the relay commands according to eac h time schedule. Relay commands are only

used with events triggered with the four analog channels.

Setup

Alarm triggered even ts (MD or Sensors) can be set to trigger Relays 1 through 4. When set, the event will

trigger the corresponding digital output.

Special Time

Enable “Special Time” to apply the relay schedule to the Special Time Zone.