Rose electronic CATx ユーザーズマニュアル

 

ViewLink CATX INSTALLATION AND OPERATIONS MANUAL

 

1 

 

The ViewLink system consists of a transmitter unit that connects to the video, 
keyboard, and mouse ports on a PC, server, or to a KVM switch and a 
receiver unit connects to a keyboard, monitor, and mouse.  The transmitter 
and receiver units are connected together with up to 1,000 feet of standard 
CATx cable.  The transmitter and receiver are available for PS/2, USB, or 
PS?-USB systems.  This section briefly describes the installation procedures. 
Refer to the following steps and diagram to install your ViewLink Catx. 

Step #1 –Connect the Receiver unit to the keyboard, monitor, and mouse 

cables on your KVM station.  Connect the provided power adapter 
to the Receiver unit’s power input jack. 

Step #2 –Connect the Transmitter unit to the keyboard, monitor, and mouse 

ports on your PC. Depending on your ViewLink CATx model, 
connect it to either the PS/2 (MiniDin6) or USB ports. If you are 
connecting to a KVM switch using the DB25 model, connect it to the 
KVM port on the switch.  

Step #3 –Connect the Receiver and Transmitter units together using up to 

1,000 feet of CATx cable (CAT5, 5e, or 6). 

Step #4 –Apply power to the KVM monitor, the Receiver unit, and boot your 

PC (turn on the KVM switch if using the DB25 model). 

When you initialize the extender, it automatically senses the cable distance 
between the transmitter and receiver unit, adjusts the compensation and sets 
up everything for you. Refer to the manual instructions for additional 
information. 

 

#1 Connect Receiver                                                           #2 Connect Transmitter  

#3 Connect CATx Cable
 
 
#4 Apply power 

  KVM Station 

PC 
 
or 
 
Switch