Rose electronic CrystalView ユーザーズマニュアル

 

 

CRYSTALVIEW INSTALLATION AND OPERATIONS MANUAL

 

(PC, SUN, PC-Serial/Audio Models) 
Connect up to 1,000 feet of CAT-5 “solid core” cable from the Local 
Units “Twisted Pair Link” RJ45 connector to the Remote Units 
“Twisted Pair Link” RJ45 connector.  (See Figures 6, 7, or 8)  
 
(MINI Model) 
Connect up to 150 feet of CAT-5 “solid core” cable for the MINI 
model from the Local Units “Link” RJ45 connector to the Remote 
Units “Link” RJ45 connector on rear panel. (See Figure 9) 
 

In this example, the Local CrystalView is connected to a  Rose 
switch and the Rose switch connects to several CPUs.  All the 
CPUs connected to the Rose switch can be accessed from the 
Remote KVM station.  All CrystalView models can be interfaced to a 
Rose switch.  See the Rose switch manual for access commands. 
 

 

Figure 10. Rose switch cabling 

 
Step 3 – Applying power 

Plug in the power adapter to a 110/220-volt source and to the power 
connector on the Remote Unit.  Only use the power adapter 
provided with the CrystalView.  Boot up the connected CPU and 
wait for it to completely boot-up.  The Local Units power is supplied 
from the CPUs keyboard port.  The video image quality may be poor 
at this point on the PC, SUN, and PC-Serial/Audio models, final 
adjustments for these models are performed in step 4.