Rose electronic Crystal View ユーザーズマニュアル

 
 

   

   

CrystalView Installation and Operations Manual 

14 

 
CrystalView to Rose switch Cable 
To connect a CrystalView Unit to a Rose switch such as a ServeView, 
UltraMatrix or UltraView, use Rose cable part number  
CAB-CX0606Cnnn.  This cable is configured with a DB25M connector on one 
end and a VGA connector, PS/2 Keyboard and PS/2 Mouse connector on the 
other end. A HD15 gender changer (included) must be used on the Video 
connector. 

To connect the Local Unit to the Remote Unit, use up to 1,000 feet of standard 
CAT-5 UTP/STP “solid core” cable terminated with RJ45 connectors.  Connect 
this cable into the “Twisted Pair Link” connector on the local and remote unit.  
CrystalView has been tested with all major makes of CAT-5 cables, including 
BICC-VERO



, Mohawk



 and AT&T



.   

CrystalView has also been tested on CAT-3 cable and on pairs within a 25-pair 
UTP trunk cable. 
 

CrystalView models with the serial option are configured with (DCE) DB9 female 
connector on the Local Unit and (DTE) DB9 male connector on the Remote Unit.  
A standard DB9 Male-Female cable is used between the Local Unit and the 
CPUs DB9 serial port. 
Typical applications for the serial link are touchscreens, serial printers and 
industrial controls.  If a null-modem cable is required, it must be connected to the 
remote units serial connector. 
 

CrystalView models with the audio option are configured with two 3.5mm stereo 
jacks on both the Local and Remote Unit. Standard 3.5mm stereo audio cables 
are used to connect between the Local Units “Line In” connector and a sound 
card’s “Line Out” connector. The Remote Units “Line Out” connects to a pair of 
computer speakers. 
 
See Appendix C. Parts and Cables for a list of cable part numbers.