Rose electronic Crystal View ユーザーズマニュアル

ページ / 52
INSTALLATION
 
 
 
   
   
CrystalView Installation and Operations Manual 
20 
 
Step 3: Applying Power 
 
Before applying power, set the Bright and Sharp controls on the Remote Unit 
completely counterclockwise (no Video compensation).  Plug in the power 
adapter to a 110/220-volt source and to the power connector on the Remote Unit. 
Only use the power adapter provided with the CrystalView.  The Local Units 
power is supplied from the CPUs Keyboard port.  Power up the CPU and wait for 
it to completely boot-up.  You should see the CPUs boot-up sequence on the 
KVMs monitor.  The Video image quality may be poor at this point; final 
adjustments are performed in Step 4. 
 
Verify that the Keyboard and Mouse function properly from the Remote Unit.  On 
Dual Units, also verify Keyboard and Mouse functionality on the Local Units KVM 
station. 
 
Step 4: Adjusting Video Compensation 
 
Video compensation adjustments are usually only required if your cable length 
exceeds 300 feet. 
 
Start an application, (preferably a windows application), and look at the right 
edge of large horizontal objects such as title bars and if there is black smearing 
on this edge, the Video is under compensated.   Rotate the Sharp control 
clockwise until the smearing disappears and the edge starts to become very 
bright.  At this point, the Units’ Video is overcompensated.  Rotate the Sharp 
control counterclockwise until the edge has no smearing or over brightness.  The 
Video compensation is now adjusted correctly for the cable length used in your 
system. 
 
The Bright control adjusts the brightness of the overall picture.  Adjust the Bright 
control to suit your needs.  The Sharp control may have to be slightly readjusted 
after adjusting the Bright control.