Roadmaster RMCD100M ユーザーズマニュアル

Installation using the screw holes on both sides of the unit.

1. Screw holes on the side of the unit.

2. Screws. Use either truss screws (5 x 
8mm) or flush surface screws (4 x 8mm), 
depending  on  the  shape  of  the  screw 
holes in the bracket. 

3. Vehicle’s Factory Mounting Bracket

4. Dashboard or Console

5 Hook (Remove this part)

Note:  The  mounting  sleeve,  outer  trim 
ring, and the mounting strap are not used 
for this method of installation.

6

2 Keys

1 Hex Nut

2 Lock Washers

1 Sheet Metal Screw

1 Metal Support Strap

2 Flat Washers

1 Mounting Bolt