Ricoh IS300e ユーザーズマニュアル

Configuring Settings Using a Web Browser

Important

❒ Before assigning a custom title, it is necessary to register custom titles us-

ing the Web Status Monitor, and restart this machine. You cannot config-
ure [Printer] and [Custom Title] settings at the same time.

Note

❒ Under each of the titles, the assigned printers are listed by the order of reg-

istration.

❖

❖ Attachment Type

Specify the type of connection method between the printer and this machine.
• Local Printer

Select this option when the printer is a local printer connected to this ma-
chine using a USB cable.

Note

❒ You cannot use more than one printer as a local printer at the same time.

When you connect two or more printers to the machine using USB ca-
bles, the printer that is detected by this machine first is only available.

• Network Printer

Select this option when the printer is a network printer.

❖

❖ Printer IP Address

When " Network Printer " is selected for [Attachment Type], enter the IP address
of the printer in the form of xxx.xxx.xxx.xxx (xxx:0 through 255).

Note

❒ You cannot configure this setting using a host name.
❒ Be sure to assign a fixed IP address even if you use the printer on a DHCP

environment.

❖

❖ [Obtain Printer Information]

Click to obtain paper tray information for the printer.
For a network printer, be sure to enter the correct IP address, and then click
[Obtain Printer Information]

An error message appears if the IP address entered is incorrect. Enter the cor-
rect IP address.

❖

❖ Default Printer

Click [Yes] to set the printer as the default printer.
Only one printer can be set as the default printer at a time.

Note

❒ When only one printer is registered, that printer is set as the default auto-

matically.

❒ If [Yes] is selected for this printer, the current default printer will no longer

be the default.

❒ If the setting for the current default printer is changed to [No], the error

message appears. Set another printer as the default.