RGB Spectrum LES290A ユーザーズマニュアル
RGB Spectrum, Inc.
QuadView HD – Serial Server Set-up
6
Rev. 1 - 8/12/08
Channel 1 Connection Settings
On the Main Menu, click Connection.
On the Main Menu, click Connection.
1. Set the Active Connect pull-down field to Auto Start
2. Set the Remote Port field to 8000
3. Set the Remote Host field to the IP address of the QVHD, for example, to the factory default
value 192.168.1.200
Figure 6. TCP Connection Settings
Click the OK button when finished entering your Serial Settings.
6. Finishing Up
1. On the Main Menu, click Connection, then click the Yes button.
2. After the LES290A Serial Server has rebooted you are ready to use the Serial Server to
connect to the QVHD.
The Serial Server will retain its configuration through power and connection cycles.