Revolabs Work Light 10-FLX2-002-POTS ユーザーズマニュアル
17
call, as well as the Speaker and Microphones, are controlled by the FLX Dialer. The
user can switch between „speaker mode‟ and „handset mode‟ while in a call.
user can switch between „speaker mode‟ and „handset mode‟ while in a call.
Handset Mode
Handset mode allows a telephone call to take place through the handset speaker and
microphone located in the FLX Dialer. This allows a single user to make and receive a
private call. It also provides the ability for the FLX2 System to act as a personal desk
phone. The Microphones and Speaker are not used during a handset call. The user can
switch between „speaker mode‟ and „handset mode‟ while actively in a call by using the
key marked „„Handset‟ or „Speaker‟.
microphone located in the FLX Dialer. This allows a single user to make and receive a
private call. It also provides the ability for the FLX2 System to act as a personal desk
phone. The Microphones and Speaker are not used during a handset call. The user can
switch between „speaker mode‟ and „handset mode‟ while actively in a call by using the
key marked „„Handset‟ or „Speaker‟.
NOTE: To switch from a handset call to a speaker call at least
one Microphone should be out of the Charger Base and
switched on, and the Speaker must be switched on. If all
Microphones are in the Charger Base when switching from the
handset call to a speaker call, at least one of the Microphones
in the Charger Base has to be unmuted manually.
one Microphone should be out of the Charger Base and
switched on, and the Speaker must be switched on. If all
Microphones are in the Charger Base when switching from the
handset call to a speaker call, at least one of the Microphones
in the Charger Base has to be unmuted manually.
Telephone Call
The FLX2 Conference Phone allows making conference calls using an analog
telephone connection. A telephone
telephone connection. A telephone
call can be made using either „speaker mode‟ or
„handset mode‟. A telephone call can be made at the same time as a video call.
Telephone calls are controlled via the FLX Dialer.
Telephone calls are controlled via the FLX Dialer.
Bluetooth Call
The FLX2 System is equipped with a Bluetooth interface that supports the Hands Free
Profile (HFP). This profile allows the user to make a call through a cell phone, a
computer, or other device via a Bluetooth connection. A Bluetooth call can be made
using „speaker mode‟ only. A Bluetooth call is controlled by the connected Bluetooth
device. A Bluetooth call can be made at the same time as a video call.
Profile (HFP). This profile allows the user to make a call through a cell phone, a
computer, or other device via a Bluetooth connection. A Bluetooth call can be made
using „speaker mode‟ only. A Bluetooth call is controlled by the connected Bluetooth
device. A Bluetooth call can be made at the same time as a video call.
NOTE: Revolabs FLX only supports the Hands Free Profile
(HFP) for Bluetooth 2.0 or higher. Applications that try to use
the Bluetooth connection not using the HFP profile, or that are
using an older HFP / Bluetooth standard are not supported by
FLX.
(HFP) for Bluetooth 2.0 or higher. Applications that try to use
the Bluetooth connection not using the HFP profile, or that are
using an older HFP / Bluetooth standard are not supported by
FLX.
Video Conference Call
The FLX2 System can be connected to a 3
rd
party video or PC conferencing system via
the Analog I/O ports located on the FLX2 Base Station. This allows the Microphones
and Speaker to be used as the audio interface for the video conference call. Video
Conference calls are controlled primarily by the video conference system. However,
audio properties can be controlled via the FLX Dialer. While the FLX2 Conference
Phone is connected to a video conferencing device, it might still make and accept calls
over the analog telephone connection or via a Bluetooth device.
and Speaker to be used as the audio interface for the video conference call. Video
Conference calls are controlled primarily by the video conference system. However,
audio properties can be controlled via the FLX Dialer. While the FLX2 Conference
Phone is connected to a video conferencing device, it might still make and accept calls
over the analog telephone connection or via a Bluetooth device.