Revolabs Conference Phone 2 ユーザーズマニュアル
Revolabs Solo™ Single-Channel – Polycom
®
SoundStation 2 Setup Guide
N
OTES AND
C
AUTIONS
:
This setup guide will guide you through the steps needed to properly connect a
Revolabs Single-Channel device to a Polycom SoundStation 2 speakerphone.
Revolabs Single-Channel device to a Polycom SoundStation 2 speakerphone.
1. Connecting the Cables
2. Configuring the SoundStation 2 speakerphone
2. Configuring the SoundStation 2 speakerphone
Note: It is important to carefully follow these instructions in order and completely. Otherwise,
your Single-Channel System and/or the phone may not function properly. Please read through
these instructions completely before proceeding. Contact Revolabs Technical Support if you
have any questions.
your Single-Channel System and/or the phone may not function properly. Please read through
these instructions completely before proceeding. Contact Revolabs Technical Support if you
have any questions.
IMPORTANT: This will only work with the SoundStation 2 with LCD screen (expandable
version – P/N 2201-16200-601). The SoundStation 2 models without LCD screen or the
expandable capability do not have the ability to activate an external wireless microphone.
version – P/N 2201-16200-601). The SoundStation 2 models without LCD screen or the
expandable capability do not have the ability to activate an external wireless microphone.
Requirements for connecting systems:
1. Revolabs Single-Channel system
2. Polycom SoundStation 2 speakerphone with LCD screen
3. Qty 1 Revolabs 2.5mm to RCA breakout cable (provided with single-
2. Polycom SoundStation 2 speakerphone with LCD screen
3. Qty 1 Revolabs 2.5mm to RCA breakout cable (provided with single-
channel system)