Radio Shack 49-1003 プリント

Please read this user’s guide before 

installing, setting up and using your new product

www.radioshack.com

1.  Remove 

the battery 
compartment 
cover.

2.  Insert 2 AA 

alkaline 
batteries. 

3.  Replace the cover.
4.  After replacing the batteries, press 

arm to arm your system. Walk past the 
motion detector. If the system does not 
trip, register the motion detector again. 
Follow steps 1 thru 6 of “registering 
your motion detector”.

If the motion detector stops working properly, or 
PROBLEM appears on your console display, replace 
the motion detector’s batteries.

• Dispose of old batteries promptly and properly. 
• Do not burn or bury batteries.
• Use only fresh batteries of the required size and 

recommended type.

• Do not mix old and new batteries, different types 

of batteries, or batteries of different capacities.

1.  Hold down TEST on your motion detector for 

3-4 seconds and then release it. 

Note: If you need to register the motion 
detector a second time, remove the batteries, 
and then hold down TEST for 3-4 seconds to 
pick up a random code.

2.  Press menu start    or    on your security 

system console. ENTER PIN (Personal 

Identification Number) appears on the 
display. 

3.  Use the console keypad to enter your four-

digit PIN. * appears on the display as each 
digit is pressed. After you enter your PIN, 1. 

INSTALL appears.

4.  Press ok and 1. INSTALL / ZONE appears.
5.  Press TEST on your motion detector. The 

console chimes and ZONE  1 SET appears on 
the console display to confirm registration. 

6.  Press clear to navigate backward through 

the console menu options. Press 1 to return 
to the main display, or press 2 to stay in 
install mode and register additional motion 
detectors.

Refer to your Wireless Security Kit User Guide (49-
1000) for instructions on how to change your PIN. 

This wireless motion detector is for use with 

your Wireless Security Kit (49-1000). Your 

Wireless Security Kit includes one motion 

detector. Purchase up to 29 additional (30 

total) motion detectors to expand and protect 

all 30 system zones. You can add additional 

door/window sensors and additional motion 

detectors, as long as the additional units do not 

exceed 30 (number of zones in your system). 

Refer to your 49-1000 user guide for more 

information on adding motion detectors and 

door/window sensors to your wireless system.

The motion detector senses movement up to 

40 feet away, and should be mounted within 

100 feet of the console to work properly.

mounting bracket

mounting screws (2)

motion detector

machine screw (1) 









