Psion Teklogix 8100107B ユーザーズマニュアル

Chapter 6: Settings
Decoded (Internal) Scanners

146

WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual

ECI Decoder

Setting this parameter to on enables the scanner to interpret any Extended Channel
Interpretations (ECIs) supported by the scanner. This parameter has no effect on
symbols that were not encoded using ECIs.
If this parameter is set to off and a symbol that was encoded using an ECI escape is
scanned, the scanner transmits the ECI escape followed by the uninterpreted data.

6.25.1.5

Code 39

Enabled

Setting this parameter to on enables “Code 39”.

Enable Trioptic Code 39

Note: “Trioptic Code 39” and “Full ASCII” should not be enabled simulta-

neously. The scanner does not automatically discriminate between these
two symbologies.

Trioptic Code 39 symbols always contain six characters. Setting this parameter to
on

allows this type of symbology to be recognized.

Convert To Code 32

Note: “Code 39” must be enabled in order for this parameter to function.

Setting this parameter to on allows the scanner to convert the bar code from “Code
39” to “Code 32”.

Code 32 Prefix

Note: “Convert to Code 32” must be enabled in order for this parameter to

function.

When this parameter is enabled, the prefix character “A” is added to all “Code 32”
bar codes.

Set Length L1 And Set Length L2

Lengths for “Code 39” can be set for Any length, Length within a range, One
discrete length or Two discrete lengths. The length of a code refers to the number of
characters (i.e., human readable characters), including check digit(s).