Psion Teklogix 8100107B ユーザーズマニュアル

6.25.2.11 Code 93

Enabled

Set this parameter to on to enable “Code 93”.

Minimum And Maximum Length

The length of a code refers to the number of characters (i.e., human readable 
characters), including check digit(s). Double-tapping on these parameters displays a 
screen in which you can set the minimum and maximum allowable code lengths – 0 
to 80.

Field Size/Char

Refer to page 148 for details.

6.25.2.12 Codabar

Enabled

Set this parameter to on to enable “Codabar”.

Start/Stop Transmit

Codabar can use the following sets of characters as start and stop characters:

a, b, c, d 
A, B, C, D 
a, b, c, d, /, t, n, *, e
DC1, DC2, DC3, DC4 

Thus, when a set is chosen, the first and last digits of a Codabar message must be 
one of those characters and the body of the message should not contain these 
characters. Setting this parameter to off strips the start and stop characters from this 
bar code. 

Check Char

When this parameter is set to Validate only, the integrity of a “Code 39” symbol is 
checked to ensure that it complies with specified algorithms.
If “Check Char” is set to Validate and Transmit, the check character is validated and 
transmitted with the data.
Setting this parameter to None disables this function.