Psion Teklogix 8100107B ユーザーズマニュアル
Chapter 10: Specifications
High Capacity–3000 mAh (Model WA3006)
High Capacity–3000 mAh (Model WA3006)
342
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
Battery Pack Electrical Specifications
10.4.2.2
Standard Discharge
Note: Standard charge is defined as charging with constant voltage limit of 4.2V
and constant current limit of 0.9A; the termination charge occurs when
the current drops to 45mA.
the current drops to 45mA.
Standard discharge is defined as discharging at a constant current of
350mA until the battery protection circuit switches the battery output off in
over-discharge mode.
350mA until the battery protection circuit switches the battery output off in
over-discharge mode.
Acceptance Test Specifications
Description
Specification
Minimum
Typical
Maximum
Over voltage detection
voltage
4.325V
4.350V
4.375V
Charge enable
4.10V
4.15V
4.20V
Under voltage detection
voltage
2.5V
2.6V
2.7V
Over current detection current
-
3.5A
-
Short-circuit detection current
5.0A
8.0A
11.0A
Short-circuit detection
voltage
150mV
200mV
250mV
Over voltage delay time
0.8s
1s
1.2s
Under voltage delay time
90ms
100ms
110ms
Over current delay time
5ms
10ms
20ms
Short-circuit delay time
160µs
200µs
240µs
Recovery charge current
0.5mA
1mA
2mA
Description
Condition
Standard
Open circuit voltage
After standard charge, measured within 24 hours.
4.15V or more
Internal resistance
After standard charge, measured within 24 hours.
200 m max.
Capacity_1
After standard charge, measured time taken for a fast
discharge.
discharge.
110 minutes or more
Charge/Discharge
cycle
After repeating standard charge and fast discharge,
measured the fast discharge time after 300 discharge
cycles.
measured the fast discharge time after 300 discharge
cycles.
90 minutes or more