Protec PROTEK II SN ユーザーズマニュアル
4
3.0. KEYPAD FUNCTIONS
1. Turns the power on
ON
2. Turns the power off
3. Selects displayed value or displayed sub-menu option
3. Selects displayed value or displayed sub-menu option
1. Enters calibration mode
2. Increases displayed value in calibration mode
3. Increases number of measurements in CAM mode
2. Increases displayed value in calibration mode
3. Increases number of measurements in CAM mode
1. Enter CAM ( average ) mode.
2. Decreases displayed value in calibration mode
3. Decreases number of measurements in CAM mode
2. Decreases displayed value in calibration mode
3. Decreases number of measurements in CAM mode
mils-to-micron-to-mils
3.1. Special Key Combinations
ON
+
Press both keys simultaneously to
changes units of measure from
mils-to-micron-to-mils
changes units of measure from
mils-to-micron-to-mils
ON
+
Press both keys simultaneously to reset
all settings back to factory defaults
all settings back to factory defaults