Planet Audio ADE-3400v3 ユーザーズマニュアル

Pre-shared Key Format: Select the Passphrase or Hax format. 

Enter the pre-shared key for WPA. Client stations must use the same key 

in order to connect with this device. Check the table below for instructions when entering 

the key.   

Radius Port: Enter the port number of the authentication server. The default port number is 

1812.  

Radius Server IP Address: Enter the IP Address of the authentication server.   

Radius Password: Enter the same key as the Radius server’s.   

Click "Apply Changes" again to save the wireless security options and make the change 

take effect.   

These settings are only for more technically advanced users who have a sufficient 

knowledge about wireless LAN. These settings should not be changed unless you know 

what effect the changes will have on your Access Point. 

 

Fragment Threshold: The threshold (number of bytes) for the fragmentation boundary for 

directed messages. It is the maximum data fragment size that can be sent. Enter a value 

between 256 and 2346. 

RTS Threshold: The RTS (Request To Send) threshold (number of bytes) for enabling 

RTS/CTS handshake. Data with its frame size larger than this value will perform the 

RTS/CTS handshake. Set this attribute to be larger than the maximum MSDU (MAC 

Service Data Unit) size TURNS OFF the RTS/CTS handshake. Set this attribute to ZERO 

TURNS ON the RTS/CTS handshake. Enter a value between 0 and 2347. 

 

                                                                                                                       35