PictureTel LIVE GATEWAY 3.1 ユーザーズマニュアル
•
An ISDN protocol
Depending on the ISDN protocol you use, you might also need the following information:
•
Number Type and Number Plan
•
Channel 1 and 2 Service Provider Identifier (SPID) numbers
•
Channel 1 and 2 Multiple Subscriber Numbers (MSNs)
You can obtain this information from your system administrator and/or your ISDN service
provider.
provider.
Appendix A contains switch requirements for the following switch types:
•
AT&T 5ESS
•
Northern Telecom DMS-100
•
Siemens
•
Europe
Your network service provider asks you for this information when you order your network service.
Board Configuration Information
After you install the LiveGateway board, the setup program will prompt you for the following configuration
information:
information:
Note
Before you enter your LiveGateway board configuration information, make sure that the
LiveGateway board's IRQ and I/O settings don't conflict with other settings currently in use on
your server. Refer to the Finding and Resolving I/O and IRQ Conflicts section in Chapter Two
of this Installation Guide for more information.
LiveGateway board's IRQ and I/O settings don't conflict with other settings currently in use on
your server. Refer to the Finding and Resolving I/O and IRQ Conflicts section in Chapter Two
of this Installation Guide for more information.
•
ISDN Switch Information
Obtain this information from your ISDN service provider:
•
Switch type
•
Switch initialization type
•
Your Service Provider Identification ( SPID) for North America
•
Your Multi-Subscriber Number ( MSN) for Europe and Asia
Note Some ISDN switches do not require SPIDs or MSNs.
•
Number plan
•
Number type
•
LAN Information
Obtain this information from your LAN administrator:
•
Host name and IP address of the LiveManager server