Phonetics 1104 ユーザーズマニュアル
Chapter 3: Quick Start
This section presents a useful guide for first-time programming of
the Model 1104. Follow instructions for installation before
attempting to program the Model 1104. Refer to Chapter 2:
Installation.
the Model 1104. Follow instructions for installation before
attempting to program the Model 1104. Refer to Chapter 2:
Installation.
3.1 The Local Keypad
Programming is accomplished using the local keypad (shown
below, Figure 3-1). Notice that a single key has several functions
assigned to it; programming results are determined by the order in
which keys are pressed.
below, Figure 3-1). Notice that a single key has several functions
assigned to it; programming results are determined by the order in
which keys are pressed.
Individual keystrokes are illustrated to show programming steps
in the correct order. If you make a mistake by entering the wrong
key, do not press another key until you hear the message “Error
1.” Then, start over with the first key in the programming
sequence.
in the correct order. If you make a mistake by entering the wrong
key, do not press another key until you hear the message “Error
1.” Then, start over with the first key in the programming
sequence.
Figure 3-1. The Model 1104 Keypad
3.2 Preparation for Programming
Read complete instructions in Chapter 2: Installation, and make
sure to follow these three steps first:
sure to follow these three steps first:
1.
Plug the AC adaptor into the 120 VAC outlet.
2.
Install the batteries.
25